Description
Is your caravan or camper awning light blinding you?
Our LED awning lamp is the solution!
Includes 3DprintRV adaptor plate that allows direct mounting of lamp in same position as original (NO DRILLING)
Three brightness settings!
Three colour settings (White, warm white & orange to keep the bugs away!)
Motion Sensors
Simple touch switch operation (simple!).
LEDS are angled down so they’re not shining directly in your eyes!
Optional passive infrared movement sensor to automatically turn the light on at night!
IP67 ingress protection (water & dust proof)!
Stainless steel Nyloc hardware supplied!
Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch.
Lamp saves last setting when power removed. Turns back on with same settings.
Detailed fitting & operation instructions supplied.
Fitting is really easy!
Remove the old lamp.
Connect the wires to the new lamp.
Screw the adaptor plate in place (uses same mounting holes!)
Bolt the new LED lamp to the adaptor plate.
Detailed fitting & operation instructions are supplied.
12 months warranty.
Design registrations pending.
SPECS:
800Lumens at max brightness.
140mA at min brightness @ 12.9v.
370mA at max brightness @12.9v.
Base dimensions: 150mm x 90mm.
Height: 55mm.
