Description
This B.E.S.T. Inline is fitted into your main hose line that you lay out at the caravan park, which eliminates the need for alterations in your vehicle’s plumbing. DIY installation takes 2 minutes!
This B.E.S.T. Inline, model 322HB (HB is for on the Hose, Brass) is fitted with Brass ‘click on’ hose fittings (compatible with other brands like Hohlman, Nylex, Neta, etc).
This allows your filter to be installed in the main hose line running to your RV, which is used to fill your tanks or for when directly connected to the water supply while camping.
Information on the B.E.S.T. INLINES for use on the hose:
This Inline is dual purpose – it can be used on your hose to fill your tanks and also when you are connected directly to mains water!
The B.E.S.T. Features
- CHEMICAL/DIRT REMOVAL (TASTE & ODOUR): Our 322HB B.E.S.T. Inline Water Filter contains a combination of quality carbons (chosen to suit Australian water conditions) to remove a broad spectrum of contaminants;
- DUAL MEMBRANES:Â 5 micron and 1 micron membranes are located at both ends of the B.E.S.T. Inlines to ensure fine filtration;
- “SilverSafe” TECHNOLOGY: Two full beds of “SilverSafe” are included to kill harmful bacteria and keep your B.E.S.T. Inline bacteria free during extended storage periods;
- LONG LIFE:Â Due to lack of bacteria within the B.E.S.T. Inlines, this means there is no reason for ‘regular interval’ replacement. The reason all other water filters recommend a replacement time period (ie. every 6 or 12 months) is that the bacteria levels can increase to an unhealthy level. With B.E.S.T., we have eliminated this problem, so you replace ours when the carbon’s life has expired – not when the bacteria sets in!
- REVERSIBLE / BACK-FLUSHABLE:Â The inside of the B.E.S.T. Inline water filter is a mirror-reverse, allowing it to be back-flushed to eliminate the build-up of contaminants on the membrane.
- SEALED:Â Â No cartridges to replace
- COMPACT:Â Our filter was designed by us to be compact, portable and portable for the travelling community.
   “…it’s the SilverSafe® that sets B.E.S.T. apart from the rest!”
(Caravan and Motorhome magazine)
The B.E.S.T. Specifications
Dimensions (without packaging, with hose ends installed):Â 340mm x 60mm x 60mm
Connection: 3/4″ bsp female threads. Inline is fitted with 3/4″ bsp x 12mm Lead-Free Brass, garden style, hose ‘click’ connector.
Micron Rating: The B.E.S.T. Inlines have dual membranes on each end – a 5 micron, followed by a 1 micron.
Flow Rate:Â 0 – 15 Litres per minute (dependant upon incoming pressure)
(TIP – The slower water flows through all water filters, the better the contaminant removal will be. If you’ve got the time, do a slow fill into your tanks.)
Max Pressure:Â Complies with Australian Standards –Â Â Holds 2100 kPa over a 15 minute period
Min. Pump Pressure Required:Â Min. 35 psi or higher
Min. / Max. Temperature: 1°C to 40°C
B.E.S.T. Filter Life: There is no time limit to replacing the B.E.S.T. Inline. (*See ‘The B.E.S.T. Features’ above.)
