Description
Tired of your 3 way caravan fridge not coping with hotter weather?
Our Klevacool™ Universal Fit Dual Fan Mod Kit can make a big difference!
This kit doesn’t include 3D printed fan mounting plates, so isn’t as neat as our other designs.
The fans & Klevacool™ controller are simply zip-tied to your existing vent.
Our fans are “smart fans”, that vary their speed to match your fridge operating conditions!
This means:
-
They’re more efficient as they only draw as much power as required to cool your fridge.
-
They shutdown if the blades are blocked by a foreign object – No burnouts!
-
They’re quieter when the ambient temperature is colder (usually at night!)
Our kits use our own design “Klevacool Electronic Fan controller”, rather than a simple thermo-switch.
-
Designed & assembled in Australia, for RV’s operating in harsh Australian conditions.
-
Switch selectable temperature settings.
-
Bypass/test switch for testing fans or in the unlikely event of controller failure.
-
Control status LED for a quick visual indication of fan status.
-
Over-temperature monitoring & alarm if temperature gets too high.
-
Seperate current protected output for internal fridge fan system.
-
Electronic reverse polarity protection to ensure full voltage is applied to the fans.
-
Extremely low current draw in standby mode (14mA).
-
Connection port for remote control (future feature)
-
Temperature sensor is built into the board, which means no dangling temperature probes.
-
Connector is quick & simple to disconnect if vent needs to be removed.
The fans are very simple to install using the included zip-ties & our highly detailed installation instructions.
The fitting of heat extracting fans to improve the efficiency of an absorption fridge is not a new idea, so what’s different about the 3DprintRV fridge fan system?
-
Controller bypass switch in the unlikely event of failure. Peace of mind!
-
Neat, professional finish.
-
Low standby power draw (14mA).
-
Simple connector system allows vent to be easily removed for maintenance.
-
Reverse power protection built in.
-
SMART FANS – Our fans move up to 1640l/min & vary their speed depending on system requirements. This means less noise, less wear & lower overall power consumption.
-
SMART FANS will simply stop if the blades are blocked & restart when they are free again. No burn outs!
-
Low current draw (0.25 amps in total).
-
A multicolour LED provides unobtrusive visual indication of what the fans are doing.
-
Over-temperature alarm alerts if temperature behind vent gets too high.
-
Simply requires 12v to be provided to the connector on the fan mounting plates. All other wiring is done.
-
System is fully tested before being sent to you.
-
No drilling required to mount the fans.
-
36 months warranty.
-
Important Notes
- These fans require 60mm of clearance from the front of the vent shroud to enable them to fit.
-
-
This fan system is designed to fit any vent type. Fans are 120mm square & there are two. Some extra room is required to mount the quick connect board.
-
The vents shown in the pictures are not supplied. The fans supplied in the kit are ZIP-TIED to your existing vent.
-
Installation of these fans is simple, but a power supply is required for them to operate. Wiring will need to be installed from the van electrical system to the vent. 4 meters of wire is included.
-
We don’t recommend connecting directly to the battery as this will bypass any battery low voltage protection devices in your van.
-
If you are unsure how to install this wiring, please consult with your local auto electrician or caravan repair shop.
-
Detailed installation instructions are included.
FANS
-
Size -120mm
-
Bearing – Hydrodynamic
-
Current draw – 0.25A total for two (6Ah/day at max speed)
-
Moves 58cfm (1640L/min) of air per fan (3280L/min total)
-
Ingress rating – IP54
INCLUDED IN KIT
-
2 x quiet, high quality brushless, smart fans
-
1 x 3D printed mounting for quick connect PCB
-
1 x fuse holder
-
2 x 3A fuses
-
4 meters of wire for battery connection.
-
Four pin connector
-
Short length of spiro wrap
-
zip ties in both black & white (to suit the colour of your vent)
-
Installation instructions
-
