Description
Tired of your caravan fridge not coping with hotter weather?
Our patented, Australian Made, Klevacool™ (pronounced Clevercool) Caravan Fridge Fan Kit for large Dometic or Thetford vents can make a big difference!
Our fans are “smart fans”, that vary their speed to match your fridge operating conditions!
This means:
They’re more efficient as they only draw as much power as required to cool your fridge.
They shutdown if the blades are blocked by a foreign object –Â No burnouts!
They’re quieter when the ambient temperature is colder (usually at night!)
Our kits use our own design “Klevacool Electronic Fan controller”, rather than a simple thermo-switch.
Designed & assembled in Australia, for RV’s operating in harsh Australian conditions.
Switch selectable temperature settings.
Bypass/test switch for testing fans or in the unlikely event of controller failure.
Control status LED for a quick visual indication of fan status.
Over-temperature monitoring & alarm if temperature gets too high.
Seperate current protected output for internal fridge fan system.
Electronic reverse polarity protection to ensure full voltage is applied to the fans.
Extremely low current draw in standby mode (14mA).
Connection port for remote control (future feature)
Temperature sensor is built into the board, which means no dangling temperature probes.
Connector is quick & simple to disconnect if vent needs to be removed.
The fans are very simple to install using the included zip-ties & our highly detailed installation instructions.
FANS
Size -120mm
Bearing – Hydrdynamic
Current draw – 0.35A total for the three (8.4Ah/day at max speed)
Moves 58cfm (1640L/min) of air per fan (4920L/min total at max speed)
Ingress rating – IP54
INCLUDED IN KIT
3 x quiet, high quality brushless smart fans
1 x Klevacool fan controller
1 x fuse holder
2 x 3A fuses
2 x mounting plates including fan connector board
4 meters of wire for battery connection.
Four pin connector
Short length of spiro wrap
zip ties in both black & white (to match your vent colour)
Installation instructions
- Made by 3DPrintRV
