Klevacool™ 3DPrintRV Fridge Fan Mod Kit for SMALL Vents (Approx 450mm x 185mm)-For THETFORD Fridge

Description

Tired of your caravan fridge not coping with hotter weather?

Patented, Australian Made, Klevacool™ (pronounced Clevercool) dual fan mod for small Dometic or Thetford vents can make a big difference!

Klevacool fans are “smart fans”, that vary their speed to match your fridge operating conditions!

This means:

• They’re more efficient as they only draw as much power as required to cool your fridge.

• They shutdown if the blades are blocked by a foreign object – No burnouts!

• They’re quieter when the ambient temperature is colder (usually at night!)

• Klevacool kits use their own design “Klevacool Electronic Fan controller”, rather than a simple thermo-switch.

• Designed & assembled in Australia, for RV’s operating in harsh Australian conditions.

• Switch selectable temperature settings.

• Bypass/test switch for testing fans or in the unlikely event of controller failure.

• Control status LED for a quick visual indication of fan status.

• Over-temperature monitoring & alarm if temperature gets too high.

• Separate current protected output for internal fridge fan system.

• Electronic reverse polarity protection to ensure full voltage is applied to the fans.

  • Extremely low current draw in standby mode (14mA).

  • Connection port for remote control (future feature)

  • Temperature sensor is built into the board, which means no dangling temperature probes.

  • Connector is quick & simple to disconnect if vent needs to be removed.

  The fans are very simple to install using the included zip-ties & our highly detailed installation instructions.

  FANS

  • Size -120mm

  • Bearing – Hydrodynamic

  • Current draw – 0.25A total  for two (6Ah/day maximum)

  • Moves 58cfm (1640L/min) of air per fan (3280L/min total at max speed)

  • Ingress rating – IP54

  INCLUDED IN KIT

  • 2 x quiet, high quality brushless smart fans

  • 1 x Klevacool fan controller

  • 1 x fuse holder

  • 2 x 3A fuses

  • 2 x mounting plates including fan connector board

  • 4 meters of wire for battery connection.

  • Four pin connector

  • Short length of spiro wrap

  • zip ties in both black & white (to match your vent colour)

  • Installation instructions

  This product carries a 12 month warranty.