Description
This Suburban is a Gas / Electric water heater and has been Water Mark certified for the Australian market. The Suburban range of water heaters include Gas, 240v & Gas/Electric models and offer manual or 12v Ignition. Manufactured in the USA featuring a steel tank with porcelain lining for a extended life and copolymer insulation jacket for superior heat retention.
These hot water systems fit under a seat or in the back of a cupboard, with a door and access from the outside of the RV.
All Suburban RV Hot Water Systems have a porcelain-lined, high tensile steel tank which are pressure tested twice for assurance of tank integrity and a long life.
All Suburban RV Hot Water Systems have an anode rod which absorbs all the corrosive action of hot water. It is located on the bottom of HWS under the main burner, you simply unscrew this to drain the tank of water. If the rod is mostly eaten away, simply replace it with a new one.
Easy access, Foam tank insulation and high recovery rate.
Direct Spark ignition for gas and an Electric Element.
Spare parts are available.
Specifications
Model: 950-00036-W
Brand: Suburban
Replaces Suburban SW6DEA
Capacity: 20.3 litre
Heating Source: Universal Gas or 240 Volt
Ignition Type: 12 Volt (Switch & Plate Assembly Included)
Recovery: 40Lt/hr 45 degree rise
Dimensions (mm): (H)320 x (W)320 x (D)500 (plus pipe connections at rear)
Includes door – Overall Dimensions 380mm x 380mm
240 volt – 50 HZ AC, 1440 watts – 6 amp.
Pressure Relief Valve: 700kpa
Water Mark Certified
Gas Inlet 3/8 SAE
Gas Consumption: 8.7 mj/h
Cold water inlet is 1/2 inch female BSP.
Hot water outlet is 1/2 inch female BSP.
Anode Thread is 3/4 inch female NPT.
